תיאור
The surface probe is particularly useful in determining the temperature of hot plates or pipe temperatures etc. Please note the accuracy and speed of response will be dependant on whether the surface is flat and heat transfer compound is used.
- Country of manufacture: United Kingdom
- Guarantee: two years
- Certification: traceable calibration certificate
- Water/dust resistance: IP65 protection
The Thermapen® thermometer incorporates a large digital display with a precise read-out over the range of -49.9 to 299.9 °C with a 0.1 °C resolution and an accuracy of ±0.4 °C. The resolution can be switched to 1 °C, if required, via a switch in the battery compartment. The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are also displayed, when applicable. Each Thermapen® is powered by two lithium coin cell batteries with a minimum life expectancy of 1500 hours.
The thermometer probe, conveniently folds back through 180 degrees into the side of the instrument when not in use. The casing is washable and includes 'Biomaster' additive that reduces bacteria growth and the ergonomic rubber seal minimises the risk of the ingress of water, dust or food.
This ribbon surface probe is ideal for measuring the temperature of a variety of flat surfaces, i.e. hotplates, pipework, bearings, etc.
| Range | -49.9 to 299.9°C (Centigrade only model) |
| Resolution | 0.1 °C or 1°C – user selectable |
| Accuracy | ±0.4°C (-49.9 to 199.9 °C) ±1 °C (200 to 300°C) |
| Battery | 2 x 3 volt CR2032 lithium coin cell |
| Battery life | 1500 hours |
| Sensor type | K thermocouple |
| Display | 14.3mm LCD |
| Dimensions | 19 x 47 x 153mm |
| Weight | 97 gram |
